Pitch
Decrease electric power used in electric motor, optimize energy consumption and decrease GHG emission with increase technology generator.
Description
Summary
Almost all of energies transformation in all economy activity work by using electric generator and electric motor. Electric motor and generator act as gate in transformation energy resources. In oil and gas energy change to electrical energy by electric generator (Genset) and more than 80% of electrical energy use by electric motor. Increasing technology of gate will increase production of energy, increase efficiency of energy use and decrease energy cost and optimize electrical energy consumption in stimulation economic growth, business investments and production and also decrease GHG emissions. For optimization office or building electric energy consumption an additional electric equipment to optimize electric energy consumption.
Inside of electric generator and electric motor occurred undue obstruction electric current in transform of energy. This obstruction occurred by incommensurate electron figure that flow between area that electron flow in wire and these phenomena caused by skin-effect. Increase flows area by innovative multi wires method will decrease electrons obstruction and heat so the production electric current of generator or rotate of electric motor will increase because of it better transform of energy. For increase green power generating need to increase its technologies in increase stability power generating, decrease cost production and operation it will make suitable green technology takes over conventional technologies. Multi wires method is new innovation technology that more green, more power generation, lower cost production and application, compatible and directly applicate to conventional technology and with new theories that possible to increase more and more. Additional electric equipment to optimize electric energy consumption is additional equipment to decrease waste electric power by inductance of electronic parts by applicate trimmer capacitor that work automatically.
Desirability
How do you know that your solution is desirable to SMEs, and will reduce GHG emissions?
It is not need to change habit of SME for energy used. For Electric generator, multi wires method it possible to increase electric power for generator in same time decrease more than 50% input power so it will decrease more than 50% greenhouse gas emissions while increasing economic growth rates, increase productivity and new business investments with decreasing production cost and increase production if SME use Diesel generator for energy source.
For electric rotating machine, multi wire method can increase rotation or torque on All kinds of electric motor without increase scale and input power. Electric motor with multi wire method can increase multi times velocity of rotation and torque with same input power that can substitute to decrease power input to reach same rotation with conventional electric motor, so this method is more efficient and green than conventional method. This method can decrease production cost, decrease operational cost of electric motor, decrease heat, and more advantages.
To applied Multi wires method in generator and electric motor just with rewind with substitution dimension of wire and change it connector with multi wires connector. It is very ease to applied and compatible with all kinds of electric motor and generator.
In reducing greenhouse gas emission Multi wires technology reducing consumption oil and natural gas in same time it increases productivity of Electric generating and electric rotating for electric vehicle that make electric vehicle equal with conventional vehicle. Oil and natural gas are main source problem of climate change and with decrease these consumptions will decrease greenhouse gas emission.
On other hand Multi wires method increase stability electric generating for renewable energy that make renewable energy more reasonable to applied and additional application trimmer capacitor in electric circuits equipment to optimize electric energy consumption and it will optimize 30% electric energy used.
Feasibility
What actions do you propose?
It is not need to change habit of SME for energy used. Multi wires method it possible to increase electric power for generator in same time decrease input power so it will decrease greenhouse gas emissions while increasing economic growth rates, increase productivity and new business investments with decreasing production cost and increase production if SME use Diesel generator for energy source.
In electric motor a component that mostly use in industry, Multi wires method will decrease input power and cost that directly increase economic growth rates, increase productivity and new business investments with more green technology.
Multi wires method generator
- These methods are increase electrical energy output generator without increase scale, cost of production and input power in same shape factor of generator. Increase of power production of generator with same Shape factor and input power than conventional generator that can substitute to decrease input power of generator to product equal power level, so the generator is more effective than before.
- New technology that increase energy production, stable, compatible and low cost production and application.
- Profitable make it reasonable to applicate.
in all kinds of generator rotation of rotor that generated fluctuation frequencies electro motion force or voltage. Fluctuation of electric current generate skin-effect in wire and induce decreasing area that electron flow thus multi wires method to solve this trouble. The grade of optimization is proportionate the grade of distraction of electric flows. Hysteria magnetic wave that comes from fluctuating current in electric generator wire winding push electron to outside of conductor that make distribution electron flow push to outside of wires.
Multi wires method Substitute All of parallel wire winding or one single wire to multi small dimension wire which are substituted wires have same and equal size with origin wire. Purpose multi wires method is to increase quantity electrons flow and cope skin-effect.
Based on experiments, increase of electric currents 2 wires multi wires method is 41 % and increase electric current 3 wires multi wires method is 51 %.
These methods are increase electrical energy output generator without increase scale, cost of production and input power in same shape factor of generator. Increase of power production of generator with same Shape factor and input power than conventional generator that can substitute to decrease dimension of generator to product equal power level, so the generator is more effective in than before.
One multi wires generator has equal output power more than two conventional generators by applicate multi wires method just in stator generator but if applicate in exciters rotor and stator generator with adaptability wound scheme, that generator has equal with 4 generator or more.
Innovation of Multi wires method to increase output power or decrease input power electric motor
- Increase multi times velocity of rotation and torque with same input power that can substitute to decrease power input to reach same rotation with conventional electric motor. Decrease production cost, decrease operational cost of electric motor, decrease heat, decrease weight or it could make longer life of battery, Compatible in application and more advantages
- Increase technology of electric motor will increase quality production of industry.
- Increase technology of electric motor will decrease operations cost and increase profit of industry.
- Increase technology will increase quality of human life and environment.
Inside of electric motor occurred undue obstruction electric current in transform of energy. This obstruction occurred by incommensurate electron figure that flow between area that electron flow in wire and these phenomena caused by skin-effect. Increase flows area by innovative multi wires method will decrease electrons obstruction and heat so the rotation of electric motor will increase because of better transform of energy. In rotation rotor toward stator of all electric motor coursed by fluctuation frequencies pattern electric current in wound of rotor or stator. Fluctuation of electric current generate skin-effect in wire and induce decreasing area that electron flow thus multi wires method to solve this trouble. The grade of optimization is proportionate the grade of distraction of electric flows. Caused of fluctuation frequencies pattern of electric current in wound wire generates Eddy current that push electrons flow to skin area of conductor electric motor.
Based on experiments single moment of couple electric motor, increase of rotation and torque 2 wires multi wires method is 145.7 % and increase torque and rotation 3 wires multi wires method is 294.6 %.
Multi wire method can increase rotation or torque on All kinds of electric motor without increase scale and input power.
Electric motor with multi wire method can increase multi times velocity of rotation and torque with same input power that can substitute to decrease power input to reach same rotation with conventional electric motor, so this method is more efficient and green than conventional method. This method can decrease production cost, decrease operational cost of electric motor, decrease heat, and more advantages.
To applied Multi wires method in generator and electric motor just with rewind with substitution dimension of wire and change it connector with multi wires connector.
New technology electricity management system
Mostly electronic equipment are inductances by applied capacitor it may decrease until 30% of energy wasted. This technology will decrease until 30% energy consumption and decrease bill. Switch on and off of electric equipment will change of magnitudes inductance and electric current of electricity in building. By use trimmer capacitor change of magnitudes inductance will cope by capability of trimmer capacitor that can chance it capacitance.
Use electric motor (Servo) with new innovation that can decrease input power and dimension to rotate trimmer capacitor that command by user or automatically. Change of electric current caused by switch on and off of electric equipment will be informed to user.
With these innovations technologies possible to decrease more than 75% electric energy used for SME that ease to applied, increase it profit and decrease GHG.
Who will take these actions?
To applied multi wires method and electricity management system it just rewinds output cores alternator for SME that use diesel generator for electricity source and rewind electric motor for SME that use electric motor for activity, it may electric tools and equipment and also for electric vehicle and for electricity management system it just installs it in electricity circuit building of SME.
It just need desire of SME to increase its technology and profit.
Where will these actions be taken?
Multi wires method and electricity management system can apply anywhere, if we win we can apply easily in the Province of Ontario, Canada, between November 2018 and June 2019 and also we ready to collaborate with others.
What are the proposal’s projected costs?
For electric generating
Application Multi wires method in electric generating (Alternator) if SME use genset (Diesel generator)
For electric power consumption
Application multi wires method in electric motors for industry or SME that use electric motor for activity.
For optimization electric energy consumption
Built additional electric equipment to optimize electric energy consumption.
Challenge
New innovation technology need pilot project to spread to wider application and I hope I have opportunity to explain more about these technologies, new adaptation 4 Maxwell equations theories and working prototype testing data.
Project cost
Estimate cost less than 5% of generator and electric motor cost to increase its technology compatibly and for new technology electricity management system is less than $ 5.000 for one building.
Scalability
Once the solution is built and implemented describe a path forward for it to scale to other users/companies.
Multi wires method and electricity management system compatible and ease to applied to all kind of alternator and electric motor and for any kinds electricity circuit in office and building, with this pilot project and acquaint it, with all advantages it will pave the way to other users/companies.
How will your solution lead to change on a larger scale over time (i.e. 3 to 5 years out)? How many businesses can potentially be affected by your solution?
Establish corporation and introduce this innovation with other companies in Asia and Europe from early this year and we still use them for now. Several corporations interest applied it to the product with specific form. For 3 to 5 years out it possible to reach wider.
What business and funding model have you considered for your solution to become sustainable?
If your model requires revenue to sustain itself, describe how it will be generated.
Funding will use to spread wider innovation Multi wires method and other innovation to applied in other technologies and empowering our start-up company Logam Energy. It can use Star-up funding method such as seed round and angel round funding.
For manufactured and join development, manufacture that interest with this innovation must funding in development and cooperate together in production for further development.
For direct application of this innovation to SME, it just funding it production process and distribution.
Impact
What impact will the proposed actions have on reducing greenhouse gas emissions?
Multi wires method generator
- Increase more than 50% electrical energy output for diesel generator in same shape factor of generator that can substitute to decrease more than 40% of input power and cost of electric generating and also GHG emission to product equal power level.
Innovation of Multi wires method to increase output power or decrease input power electric motor
- Increase 300% velocity of rotation and torque with same input power that can substitute to decrease 66% input power to reach same rotation with conventional electric motor.
Decrease more than 60% operational cost of electric motor. Increase technology electric motor such as in electric vehicle will increase interest to applied electric vehicle in SME’s operation and it will decrease all GHG that caused by SME’s transportation.
New technology electricity management system
Mostly electronic equipment are inductance's by applied capacitor it may decrease until 30% of energy wasted.
What are other key benefits?
Environmental
- Increase technology will increase quality of human life and environment.
Economic
- Increase productivity, durability and technology of electric generator and electric motor.
- New technology that increase energy production, stable, compatible and low cost production and application.
- Profitable make it reasonable to applicate.
- Increase technology of electric motor will increase quality production of industry.
Social
- Increase jobs opportunity more.
- Equalization of Electric facility.
And much more.
About the Authors
RIDHO FERMANA KUSUMA
From 5 years’ research in Telkom university and Indonesian Institute of Sciences
Bandung, West Java, Indonesia
Multi Wires method is my innovation that based on working prototype. To promote these innovations, I am building My start-up company Logam Energy.
Logam Energy is my start-up company and now as an innovation transfer agency. With introduce several new innovations in electromagnetic induction for telecommunication, detection, sensor, energy, electric rotating machine, electric generating and more in all band frequency of electromagnetic wave in electromagnetic induction.
Ready to collaborate for better future.
Try it once and see. Logam Energy ready to collaborate.
Related Proposals (optional)
Commercial and Industrial Energy
Efficiency Stimulation economic growth, decrease GHG emissions with two new innovations. It talks about decrease input power in electric generating and increase electric power production will decrease GHG emissions in increase economic growth.
References
- FermanaKusuma, Ridho (2017). Innovation of Multi wires method to increase quantity of electron that flows in fluctuates electric currant. Journal Academia.edu.
- FermanaKusuma, Ridho (2017). Innovation of Multi wires method to decrease electric input power of electric motor. Journal Academia.edu.
- FermanaKusuma, Ridho (2017). Innovation of Multi wires method to increase rotation and torque of electric motor Journal Academia.edu.
- FermanaKusuma, Ridho (2017. Innovation of Multi wires method to reduce dimension of electric motor. Journal Academia.edu.
- FermanaKusuma, Ridho (2017). Innovation of Multi wires method generator to increase output electric current generator. Journal Academia.edu.
By:
Logam Energy
